Worm gear reducer Ket-Motion 2030 P
with feather key groove
Description
Universally usable and maintenance-free worm gear reducer with an axis distance of 30 mm and with nine different reduction ratios. The housing is encapsulated to prevent the escape of grease and the ingress of dust. The worm gear pair is left-handed. The direction of rotation on the shaft is arbitrary.
Special features
- Axis distance 30 mm
- Maintenance-free grease lubrication
- Aluminium housing, anodized , orange in standard, other colors possible to suit customer requirement
- 9 reduction ratios from 1:1 to 64:1
- Backlash on the drive shaft 1° ± 0.5°, (for i=1:1 2°± 0.5°)
- Duty cycle of 20 % at 5 min (1 min ON, 4 min OFF)
- Service life of 1,000 hours with:
- full load and
- input speed of 500 rpm and
- duty cycle 20% with 5 min and
- ambient temperature 20 °C
Variant key
- Variant 2030.00-S0PRXX with one drive pin
- Variant 2030.00-D0PRXX with through going axis
Technical notes
- Permissible force on drive side: FA= 800 N when FR= 0 N and FR= 800 N when FA= 0 N
- The positions of the feather keys as standard in variant D are not in line. Possible on enquiry if needed
| Item number | Ratio i | Self-locking static | Output speed range n in rpm | Max. output torque M in Nm | Max. drive torque M in Nm | Drive side | Degree of efficiency in % | |
| Radial force1) FR in N | Axial force2) FA in N | |||||||
| 2030.00-S0PR64 2030.00-D0PR64 |
64 : 1 | Yes | 100/500/1000 | 8.5/7.5/6.0 | 0.5/0.4/0.3 | 700 | 600 | 27 |
| 2030.00-S0PR45 2030.00-D0PR45 |
45 : 1 | up to 5 Nm |
100/500/1000 | 10.5/9.5/9.0 | 0.9/0.8/0.8 | 700 | 600 | 25 |
| 2030.00-S0PR34 2030.00-D0PR34 |
34 : 1 | up to 5 Nm |
100/500/1000 | 12.0/11.0/10.0 | 1.2/1.1/1.0 | 600 | 500 | 29 |
| 2030.00-S0PR25 2030.00-D0PR25 |
25 : 1 | No | 100/500/1000 | 13.5/12.0/11.0 | 1.3/1.2/1.1 | 500 | 500 | 41 |
| 2030.00-S0PR20 2030.00-D0PR20 |
20 : 1 | NO | 100/500/1000 | 15.0/13.5/12.0 | 1.7/1.6/1.4 | 500 | 400 | 43 |
| 2030.00-S0PR17 2030.00-D0PR17 |
17 : 1 | No | 100/500/1000 | 17.0/15.0/14.0 | 2.2/1.9/1.8 | 400 | 400 | 46 |
| 2030.00-S0PR10 2030.00-D0PR10 |
10 : 1 | No | 100/500/1000 | 20.0/18.0/16.0 | 3.4/3.1/2.8 | 400 | 300 | 58 |
| 2030.00-S0PR05 2030.00-D0PR05 |
5 : 1 | No | 100/500/1000 | 19.0/17.0/15.0 | 5.4/4.9/4.3 | 400 | 300 | 70 |
| 2030.00-S0PR01* 2030.00-D0PR01* |
1 : 1 | No | 100/500/1000 | 2.0/1.5/1.0 | 2.7/2.1/1.4 | 400 | 300 | 73 |
1) The values of FR apply only when FA = 0 N
2) The values of FA apply only when FR = 0 N
* Backlash on the output shaft 2°± 0.5°
3D data (in STEP format) is saved as a zip file on your computer. After unpacking the files, you can open and view the data with an STP viewer (e.g. the free Autodesk Viewer). To download our 3D data, you have to log into your customer account. If you do not yet have a customer account, you can register now.